You are here: Home > Compression Mould
Contact Us
  Tel:0086-576-84220820
  Fax:0086-576-81103280
  Email:tq@tqmould.com
 
Other Thermoset Plastic Mould   

Of all the commonly used compression molding materials, in addition to SMC, BMC, DMC which are used in the largest amount, the following composite materials are also used in compression molding process and transfer molding process:

1. Phenolic Resin

2. Amino Resin

3. Epoxy Resin

4. DAP Resin

In addition to SMC, BMC compression molding technology, which is used commonly, the following molding technologies are also used:

1. Injection Technology BMC or injection SMC are placed in the stuffer which feeds the injection unit. For these thermosets non return valves are used. The Composit is injected into the closed hot tool, fills the cavities and polymerizes. After complete cure the parts are released hot.

Injection moulding is used for highest precision parts and complex geometries.

2. Injection-Compression Moulding Technology BMC or injection SMC are placed in the stuffer which feeds the injection unit. For these thermosets non return valves are used. The Composit is injected into the semi closed hot tool, fills the cavities and polymerizes. After complete cure the parts are released hot.

Injection compression preserves the fibres and improves the degassing of the cavities. The process is used for parts with high mechanical strengths.

 

Insulator

melamine bowl/dish

phenolic resin cartridge

phenolic resin cartridge mould

melamine bowl mould

phenolic resin knob

phenolic resin cartridge

UF resin toilet seat cover

phenolic resin mould

phenolic resin knob mould

Home | About us | Technologies | Equipments | News | Contacts